Hovercraft
Saige Miller & Kelly Schneck
January 4, 2016
Saige Miller & Kelly Schneck
January 4, 2016
Materials
- plywood
- shower curtain
- duct tape
- screws & nails
Creation
We began by cutting plywood into a large oval and a small circle.
Then we sanded down the plywood.
The next step was to drill a hole into the plywood. This hole is where the air will be blown in from.
A shower curtain covers one side of the oval. It is secured to the flip side by staples and duct tape.
The smaller circle is screwed on outside of the shower curtain, and small holes are cut in order for the air to lift the hovercraft from the ground.
The smaller circle is screwed on outside of the shower curtain, and small holes are cut in order for the air to lift the hovercraft from the ground.